Establishing The Connection - Targus AMW56AP User Manual

Targus Wireless Optical Laptop Mouse

Establishing the Connection

(A) Plug the USB receiver into an available USB port on your computer.
(B) Turn on the mouse by sliding the power switch to the ON position, located
on the bottom of the mouse.
ON
OFF
This mouse is a plug and play device. It will automatically operate when
the USB receiver is connected to the computer.
6
Targus Wireless Optical Laptop Mouse
Power On:
Slide the power switch to the ON position.
Power Off:
Slide the power switch to the OFF position.
Power Saving mode:
After an extended period of time, if the mouse is not used, it will automatically
enter power saving mode to conserve power and increase battery life. Click
on any mouse button or simply move the mouse to resume the normal opera-
tion. The mouse may take a few seconds to reconnect with your computer.
Battery Life Indicator
• The low power light will start flashing
every 3 seconds when less than 5% of
the battery power remains. Replace the
batteries as soon as possible
Power Management
• To extend the life of your battery, turn off the mouse while travelling or
when you're not using it.
7
Battery Life Indicator