Establishing The Connection; Battery Life Indicator; Power Management - Targus WIRELESS COMPACT User Manual

Targus Wireless Compact Laser Mouse

Establishing the Connection

(A) Plug the USB receiver into an available USB port on your computer.
(B) Turn on the mouse by sliding the power switch to the ON position, located
on the bottom of the mouse.
ON
OFF
This mouse is a plug and play device. It will automatically operate when
the USB receiver is connected to the computer.
6
Targus Wireless Compact Laser Mouse
Power On:
Slide the power switch to the ON position.
Power Off:
Slide the power switch to the OFF position.
Power Saving mode:
After an extended period of time, if the mouse is not used, it will automatically
enter power saving mode to conserve power and increase battery life. Click
on any mouse button or simply move the mouse to resume the normal opera-
tion. The mouse may take a few seconds to reconnect with your computer.

Battery Life Indicator

• When the mouse is turned on, the LED
illuminates for 3 seconds and then fades
out
• The low power light will start flashing every
3 seconds when less than 5% of the battery
power remains. Replace the batteries as
soon as possible"

Power Management

• To extend the life of your battery, turn off the mouse while travelling or when
you're not using it.
7
Battery Life Indicator