Drive Pulley - BOMBARDIER Safari 377 1988 Operator's Manual

•
WARNING: Before checking track
alignment, ensure that the track
is free of all particles which could be
thrown out while track is rotating. Keep
hands, tools, feet and clothing clear of
track. Ensure no-one is standing in close
proximity to the vehicle.
To correct, stop the engine, loosen the
rear idler wheels retaining screws then
loosen the lock nuts and tighten the ad-
juster bolt on side where the slider shoe
is the farthest from the track insert guides.
A001005011
Tighten lock nuts and the idler wheel re-
taining screws.
32---------------------------
Drive Pulley
Safari 377/377E
Inspect the Dura/on bushing condition
by checking the free-play of the sliding
half pulley. This is achieved by restraining
the inner half and checking if the sliding
half
moves
in the direction of the arrows
more than 3 mm (
1/8").
If so, contact
the dealer.
A007003004
Mark
reference
point on
both halves
Maximum free-play
3 mm
(1/8")
•
WARNING: The drive pulley should
be inspected by an authorized
dealer at least annually.
Safari 503
This vehicle is equipped with the TRA
drive pulley (Total Range Adjustable). This
pulley includes three (3) calibration screws
that provide the opportunity to perform
minor adjustments to the clutch in order
to keep the engine at it's peak power
R.P.M., thereby maintaining optimal ve-
hicle performance.