Track Condition - BOMBARDIER Safari 377 1988 Operator's Manual

Stopper strap
The function of the suspension stopper
strap is to control the transfer of vehicle
weight during acceleration. The longer
the belt, the more the weight will be trans-
ferred to the track to provide a better trac-
tion. The shorter the belt, the lesser the
weight transferred to the track, thus main-
taining a more positive direction. Adjusting
holes on the stopper strap allow to adjust
it according to driver's requirements, field
and or snow conditions.
Safari 377/377E
For normal use locate bolt through
2nd
hole and its corresponding hole "B".
HOLE CORRESPONDING
NUMBER
HOLE
1
''A''
2
''B/'
3
''C''
1" hole
30 ________________________ __
Safari 503
For normal use, insert bolt through strap
holes as shown.
Torque to 10 N•m 189 lbf•inl
~
/r 1"hole
. - - - " 5th
hole
A021005002
•
WARNING: Always torque the nut
to 10 N•m (89
lbf•in).
Track Condition
Lift the rear of the vehicle and support
it off the ground. With the engine OFF,
rotate the track by hand, and inspect con-
dition. If worn or cut, or if track fibers
are exposed, or if missing or defective
inserts or guides are noted; contact an
authorized dealer.
•
WARNING: Do not operate a
snowmobile with a cut, torn or
damaged track.