Table of Contents
Advertisement
LOW FLAME
ADJUSTMENT
(See illustration "D")
This appliance is shipped from the factory with low and
COUNTERCLOCKWISE
mediumflame settingsadjustedfor use with naturalgas.
_
"_
TO
INCREASE FLAME
If further adjustmentis necessary,or to readjustfor use
,= _SlZE
with LP, proceed as follows:
CLOC-K_V"
'SEE _"_
_,Jt I ILCa"
1. Light burner and set control knob for low flame•
2. Remove control knob from valve stem.
_
R'_
CAUTION: NEVER USE A METAL BLADE TO PRY
KNOB OFF. IF KNOB CANNOT BE EASILY
REMOVED, TUCK FOLDS OF A CLOTH
DISHTOWEL UNDER THE KNOB AND PULL THE
VALV
TOWEL UPWARD WITH STEADY, EVEN
STEM_
PRESSURE•
3. Insert a slender, thin-blade screwdriver into the recess
at center of valve stem and engage blade with slot in
adjusting screw.
ILLUSTRATION "D"
4. Turn center stem adjusting screw to set flame size.
•.. clockwise to reduce.
•.. counterclockwise to increase.
5. Replace control knob when adjustment is completed.
Proper adjustment will produce a stable, steady blue
flame of minimum size. The final adjustment should be
checked by turning knob from high to low several times
without extinguishingthe flame.
This adjustment,at low setting, will automatically provide
the proper flame size at mediumsetting.
-13-
Advertisement
Table of Contents
