Table of Contents
Advertisement
RV5060-UM Rev. A
Button Locations and Functions
15. Headphone Socket: Accepts 3.5mm stereo headphone jacks.
16. USB Input: Press the MODE button (32) until "DISC" appears in the display. Then plug in your USB
device. "USB" will then appears in the display.
Note: The RV5060 will control the USB audio device. (See "USB Input" for more details).
17. Music Disc Intro Button: Press to preview each track on the music disc for 6 seconds. Press again to
cancel.
18. Speaker Control Switch: Switches the main speakers off/auxiliary speakers on, main speakers on/aux-
iliary speakers off or main/auxiliary speakers on.
19. Sleep Button: Sets the sleep timer. (See "Sleep Timer Operation" for more details).
20. Alarm Button: Sets the alarm. (See "Alarm Operation" for more details).
21. Repeat Button:
Disc Mode: Press to repeat a music disc track or to repeat a movie disc title or chapter. Press again to
cancel.
IPOD Mode: (See IPOD Operations section for more details).
22. Storage Tray.
23. Volume and Select Button: Rotate to increase or decrease the volume level. Press to select the
sound controls: Bass, Treble and Balance.
IPOD Mode: (See IPOD Operations section for more details).
24. Radio AS/PS Button: Automatic radio station memory storing (AS) and Preset radio station scanning
(PS). (See "AM/FM Operation" for more details).
25. Radio SCAN Button: Press this button and the tuner will scan up, pausing for 5 seconds at each
strong station. Press the button again to cancel the scan function.
26. Radio SEEK Button: Press this button and the tuner will scan up to the next strong station and stop.
27. Main Speakers A, B and C Selector Switch: Selects the different sets of speakers installed.
28. Audio/Video Input Jack: Press the MODE button until "AV IN F" appears in the display then
plug in a device via the 3.5mm audio/video input plug.
Note: The RV5060 does not control the device, it just allows the audio/video to be played
through the system.
29. EQ/LOUD Button (Equalizer and Loudness): Press to select between the preset sound equalization
settings. Press and hold the button to boost high and low tones at low volume levels (loudness).
30. AM/FM Band Selector Button: Press to select the desired radio band: 1 FM, 2 FM, 3 FM,
1 AM and 2 AM.
31. DISP Button (Display): Press to display the clock or frequency in radio mode, track in music disc
mode, chapter and elapse time in movie disc mode or track in IPOD mode. Press and hold to perform
clock setting functions (See "Setting the Clock" for more details).
32. Mode Button: Press to choose between AV IN F (Audio/Video in Front), AV IN R (Audio/Video in
Rear), RADIO (AM or FM Band), DISC (Music, Movie or USB Input) and IPOD (IPOD Input).
33. DIM Button (Display Dimmer): Press to select the desired level of brightness of the display.
4
5/12/10
9:18 AM
Page 4
(Continued)
Advertisement
Table of Contents
