Figure 2.6.3.2: App - Wi-Fi Settings; Figure 2.6.4.1: Controller Preflight Update Prompt; Figure 2.6.4.2: App - Software Update; Figure 2.6.4.3: App - Download Update - 3DR Solo User Manual

2.6.4 Update
Before your first flight, use the app to perform the required first-flight update. The controller will prompt you for the
update with the preflight update alert. Ensure that both the controller and Solo are powered, the controller has at
least 50% battery remaining, and the app is connected to Solo Wi-Fi. The total update process can take up to 10
minutes.
To start the update, open the Settings menu in the app, and select Software Update.
Before starting the update, you'll need to connect your device to the Internet and download the update. Select
Download Update to start the process, then exit the app and connect to the Internet.
The app will show the following display while the update is downloading.

Figure 2.6.3.2: App - Wi-Fi Settings

ARTOO UPDATE SCREEN FEEDBACK V10C
preflight update
Required before first flight!
Use 3DR Solo App to update

Figure 2.6.4.1: Controller Preflight Update Prompt

Controller updating
Update will take about 5 minutes
Please ensure charger is connected
Controller may go dark while updating
Controller updated

Figure 2.6.4.2: App - Software Update

Please reconnect to Sololink wifi
Press to continue
waiting for Solo
Press when LEDs are green

Figure 2.6.4.3: App - Download Update

Update Requirement Screen
Controller update in progress screen
Is displayed after user initiates update in app.
Persists until controller update is successful.
Update complete feedback.
Tells the user that controller update was successful.
HAPTIC: Three 20 millisecond pulses,
to communicate update completion.
A-Press required to dimiss (same as current implementation)
Waiting for Solo
Persists until Solo reconnects
or
Artoo auto-shutdown
Update complete (Connects to matching version Solo)
12
FLY
Hold to start motors
FLY
Cable Cam
Returns user to hold-Fly-button screen
Green Solo LEDs (showing update complete) change to
standard red and white when this screen is displayed
Update Timeout
If update does not
"update-unsucces
Update failure
If update fails, disp
screen
Update unsuccessful (
update
Please us
the
Orbit
Prompt stays on screen
Post Unlock Behavior
After system is unlocke
versions that were last s
(Even if they have failed
12