Figure 2.6.4.9: Controller Update Complete Displays; Figure 2.6.4.10: Controller - Waiting For Solo; Figure 2.6.4.11: App - Update Success; Figure 2.6.5.1: App - Viewing Video - 3DR Solo User Manual

The controller will restart and display a green checkmark to indicate that the controller was updated successfully.
When you see the green checkmark on the controller, re-connect to Solo Wi-Fi in the app and press A on the
controller to continue the update.
After pressing A, Solo will restart to complete the update. The controller will display waiting for Solo while Solo
restarts.
When the update is complete, Solo's LEDs will turn green, the controller will return to the standard takeoff screen,
and the app will show that the software is up to date. After displaying green, Solo's LEDs will return to the standard
white-and-red pattern. If you do not see white-and-red LEDs after a few minutes following the update, restart Solo.
2.6.5 View Video
After the update is complete, select Fly Solo to view video in the app. Solo, the controller, and the GoPro® must
be powered to view video. Verify that you can view video before your first flight. If the video is inverted, see section
2.5.2.
preflight update
Required before first flight!
Use 3DR Solo App to update
Controller updating
Update will take about 5 minutes
Please ensure charger is connected
Controller may go dark while updating

Figure 2.6.4.9: Controller Update Complete Displays

Controller updated
Please reconnect to Sololink wifi
Press to continue
waiting for Solo
Press when LEDs are green

Figure 2.6.4.10: Controller - Waiting for Solo

Figure 2.6.4.11: App - Update Success

Figure 2.6.5.1: App - Viewing Video

Required before first flight!
Update Requirement Screen
Use 3DR Solo App to update
Controller updating
Update will take about 5 minutes Controller update in progress screen
Is displayed after user initiates update in app.
Please ensure charger is connected
Persists until controller update is successful.
Controller may go dark while updating
Controller updated
Please reconnect to Sololink wifi
Update complete feedback.
Tells the user that controller update was successful.
Press to continue
HAPTIC: Three 20 millisecond pulses,
to communicate update completion.
A-Press required to dimiss (same as current implementation)
waiting for Solo
Waiting for Solo
Persists until Solo reconnects
Press when LEDs are green or
Artoo auto-shutdown
Update complete (Connects to matching version Solo)
12
Hold
Cable Cam
Returns user to hold-Fly-button screen
Green Solo LEDs (showing update complete) change to
standard red and white when this screen is displayed
Controller update in progress screen
Is displayed after user initiates update in app.
Persists until controller update is successful.
Update complete feedback.
Tells the user that controller update was successful.
HAPTIC: Three 20 millisecond pulses,
to communicate update completion.
A-Press required to dimiss (same as current implementation)
Waiting for Solo
Persists until Solo reconnects
or
Artoo auto-shutdown
Update complete (Connects to matching version Solo)
12
FLY
to start motors
Hold
FLY
Update unsuccessful (Artoo and
FLY
Cable Cam
Returns user to hold-Fly-button screen
to start motors
FLY
Green Solo LEDs (showing update complete) change to
standard red and white when this screen is displayed
Orbit
Prompt stays on screen until upda
Post Unlock Behavior
After system is unlocked, user shou
versions that were last successfully
(Even if they have failed in their mo
Update Timeout
If update does not complete
"update-unsuccessful" screen
Update failure
If update fails, display "update
screen
Update
If upda
Update
Orbit
update uns
Please use 3DR S
the update
14