5. Selecting user menu type and resetting default parameters
Switch off the thermostat by removing the batteries and switch back on by replacing them; for approximately
3 s, the display will show the firmware version and the icon
• Easy Menu
Within 3 secs, touch
both choices. The thermostat will restart, showing the easy operating mode for which, using
, only the desired temperature set point can be set without the need to confirm the entered value.
• Normal menu
Within 3 secs, touch
both choices. The thermostat will restart, showing the normal operating mode.
N.B. When replacing the batteries, the set menu will automatically start when the thermostat is switched
back on, without having to repeat the above procedure.
• Reset default parameters
This menu is for the sole use of the installer.
and, using
and
and, using
and
.
, select EASY and then YES confirming with
, select EASY and then NO confirming with
and
13