Spare Parts; Other Accessories - THUNDER TIGER Staudacher S-300 Assembly Manual

SPARE PARTS & ACCESSORIES
XIV. Locate A Good Flying Site
Generally, the best place to fly your model is at an AMA (Academy of
Model Aeronautics) chartered club field. Your local hobby dealer can
tell you if there is such a club in your area or write the AMA for
information. It is also a good idea to join this organization before
flying your model since they offer liability insurance that can protect
you if your model causes damage or injury to others.
Academy of Model Aeronautics
5151 East Memorial DR
Muncie, IN 47302-9252
If there is not a chartered club field in your community, you will need
to find a large area free of obstructions, and has a smooth grass or
asphalt surface to be used as a runway. For safety's sake, it should be
located well away from houses,buildings,schools,power lines and airports.
If you will be flying within 6 miles of an airport, you should check with
the airport manager before flying your model.
XV. A Note On Batteries
The batteries are the heart of your radio system. Make sure you have
fully charged batteries! With rechargeable batteries, follow the
manufacturers instructions to make sure the batteries are fully
charged, especially the first time the radio is used.
We have used a 700mAh battery pack as the servos we installed are
only standard servos. We would recommend you use larger capaci-
ty(1000mAh) if you use high performance servos as they will draw
more current than ordinary servos.
XVI. Flying Your Staudacher
We recommend that you take it easy on your first few flights and get
a feel for your new airplane. We test flew our Staudacher on low rates
for the first two flights to get a feel for how it tracked and handled.
We also found that landings were smooth and uneventful on low rate.
On high rate our plane was very aerobatic, maneuvers were crisp and
clean, and incredibly responsive.
XVII. Notes
Date
Dual rate setup:
Elevator low: ________ ________ ________
Elevator high: ________ ________ ________
Aileron low: ________ ________ ________
Aileron high: ________ ________ ________
XVIII. Spare Part
#AS6174 FRP Cowl
#AS6175 FRP WHEEL PARTS
#AS6176 MAIN LANDING GEAR SET
#AS6177 CANOPY
Date Date
Look at Thunder Tiger Accessories
• Durable mechanism & light weight for contest use
• Super thin design for maximum versatility
• Smooth and safe locking system
• No bending necessary, adjustable axle included for 30, 40 and 60 size.
Contents:
Silicone Pick-up Tube
Straight Tank Nipple & 90° Tank Nipple
Plastic Locking Cap
Rubber Stopper
Pick-up Clunk
Features:
• Straight and 90° tank nipples are both included for ease of installa-
tion.
• Extended lip design protects fuel line from being pinched against
firewall.
• Molded-in pull tab at rear of tank allows easy tank removal.
Drilling exact holes in your engine mount plus properly locating
the prop shaft/thrust washer for positioning the spinner ring is always a
hassle, until now.
Thunder Tiger's new Engine Mounting Guides make installation of
our most popular engines a snap; more importantly, you can leave your
brand new engine in the box and not expose it to sawdust, drill shav-
ings, glue, and paint.
15
Superlite Retracts
ITEM NO DESCRIPTION
TTR3005 Retract, .10 Size
TTR3006 Retract, .30 Size
TTR3007 Retract, .40 Size
TTR3008 Retract, .60 Size
Fuel Tank Sizes
ITEM NO. DESCRIPTION
TTR3271 2.5oz.(75cc)
TTR3272 24oz.(720cc)
TTR3273 32oz.(960cc)
Engine Mounting
Guides
ITEM NO. DESCRIPTION
TTRPN0197 Guide, GP-07
TTRPN0198 Guide, GP-42
TTRPN0199 Guide, PRO-40/46
TTRPN0200 Guide, PRO-25/36
TTRPN0201 Guide, PRO-61