Motorola V80 Service Manual page 36

Troubleshooting
Table 3. Manual Test Commands (Continued)
Key Sequence
5*0*8 Set audio level 8
5*0*9 Set audio level 9
5*0*10 Set audio level 10
5*0*11 Set audio level 11
5*0*12 Set audio level 12
5*0*13 Set audio level 13
5*0*14 Set audio level 14
5*0*15 Set audio level 15
6*2*2*0*0 Set Audio Path. Int Mic, IntSpk, RX unmute, TX unmute
6*4*6*0*0 Set Audio Path. Boom Mic, Boom Spk, RX unmute, TX unmute
10*0*3 Set band GSM 900
10*0*4 Set band DCS 1800
10*0*5 Set band PCS 1900
10*0*6 Set dual band GSM 900/1800
10*1*0 Read band
18*0 Initialize non-volatile memory (Master Reset)
18*1 Initialize non-volatile memory (Master Clear)
55*2*001 Test Display. All pixels ON
55*2*000 Test Display. All pixels OFF
55*2*002 Test Display. Checkerboard pattern A
55*2*003 Test Display. Checkerboard pattern B
55*2*004 Test Display. Border pixels ON
*#06# IMEI Check
Phone Set up --> Flex Version/Technology/S-W Version/Readiness Status
Phone Status -->
Other
Information
36
Test Function/Name
April 14, 2004
Remarks
3= GSM 4= DCS 5= PCS 6 =GSM/DCS
No Test Mode Required
No Test Mode Required
V80
6809471A72-O