Asus Rampage V Extreme Manual page 118

Intel Virtualization Technology [Disabled]
When set to [Enabled], a VMM can utilize the additional hardware capabilities provided by
Vanderpool Technology.
Configuration options: [Disabled] [Enabled]
Hardware Prefetcher [Enabled]
This item allows the CPU to prefetch commands and data in the L2 cache, reducing the
DRAM loading time and improving system performance.
Configuration options: [Disabled] [Enabled]
Adjacent Cache Line Prefetcher [Enabled]
This item allows the mid level cache (L2) to prefetch adjacent cache lines, reducing the
DRAM loading time and improving system performance.
Configuration options: [Disabled] [Enabled]
Boot Performance Mode [Max Performance]
This item allows you to select the CPU performance state during system boot before the
operating system takes control. The CPU runs at a selected performance ratio based on CPU
configuration.
Configuration options: [Max Non-Turbo Performance] [Max Battery] [Turbo Performance]
Active Processor Cores
The items in this menu allow you to enable/disable the cores of your CPU.
Active Processor Core (0-5) [Enabled]
Configuration options: [Enabled] [Disabled]
CPU Power Management Configuration
This item allows you to manage and configure the CPU's power management system.
Enhanced Intel SpeedStep Technology [Enabled]
This item allows your system to adjust the CPU's voltage and cores' frequency,
resulting in decreased power consumption and heat production.
[Disabled]
[Enabled]
Turbo Mode [Enabled]
This item allows you to automatically set the CPU cores to run faster than the base
operating frequency when it is below the operating power, current, and temperature
specification limits.
Configuration options: [Enabled] [Disabled]
CPU C-States [Auto]
This item allows you to set the power saving options of the CPU states.
Configuration options: [Auto] [Disabled] [Enabled]
3-30
The CPU runs at its default speed.
The system controls the CPU speed.
Chapter 3: BIOS setup