Audio Settings; Time Settings - Planet Audio PML9660B User Manual

1. Popular OE steering wheel functions are already pre-programmed from the factory. If your
vehicle does not support the exact same functions already pre-programmed, you will need to
clear / reset the SWC interface and program in the exact functions of your vehicle. To clear /
reset the SWC interface, touch [ Reset ] icon.
2. To begin programming the SWC interface after it has been cleared / reset, press a number
1 ~ 12, then press a function. A check mark should appear corresponding to the number
and function. Continue programming in this manner until all of the OE steering wheel control
functions are completed.
NOTE:
Functions 1 ~ 12 must be assigned to a function on the OE steering wheel. For example, if
the OE steering wheel does not support Preset + and Preset -, then these functions must be
cleared / reset in order for the other functions to work correctly.
3. To "learn" the programming completed in step 2 above, touch the [ Learn ] icon. You will then
be prompted to push each button on the OE steering wheel (for 1 second), so the unit can learn
the corresponding function.
4. SWC learning / programming is now complete.
5. Touch [ ] to exit.

Audio Settings

1. Touch [ ].
2. Touch an option repeatedly to select.
Audio Settings Options
On
Subwoofer
Off
80Hz
Subwoofer Filter 120Hz
160Hz
On
Loudness
Off

Time Settings

1. Touch [ ].
2. Touch an option repeatedly to select.
Time Settings Options
Date Y/M/D
Clock Format 24Hr/12Hr Touch [ 24Hr ] or [ 12Hr ] to switch clock mode.
Time H/M
NOTE:
When date/time is set, touch [ Save ] to confirm or [ Cancel ] to exit.
Settings
Description
Turn On the subwoofer.
Turn Off the subwoofer
Select a crossover frequency to set a cut-off frequency for the subwoofer's LPF
(low-pass filter).
Turn On the loudness
Turn Off the loudness
Description
[ ] [ ]
Touch or to set year, month and day.
[ ] [ ]
Touch or to set hour and minutes.
9