Settings; System Settings; General Settings; Calibration - Planet Audio PML9660B User Manual

System Settings

1. Press the [ MENU ] button on the front panel or [ SRC ] on the remote control to display the
playing source menu.
2. Touch the Settings icon [

General Settings

1. Touch [ ], if necessary.
2. Touch to highlight a setting to display/select an option.
General Settings Options
USA/Asia/Japan/Europe/Europe
Radio Region
LW/Oirt
Distance
Radio Range
Local
On
Beep
Off
Key Color Choose the backlight color of the buttons.

Calibration

Start
Shortcut Set the shortcut.
SWC Enter to SWC interface
Load Factory Restore to default settings.
Calibration
When the touch operation is not sensitive or valid, you should
calibrate the touch screen using the calibration setting function.
Adjust the response positions of the touch panel as followings:
1. Touch [ Start ] to enter.
2. Touch [ Cancel ] to exit.
3. Press and hold the center of [ + ] for 2 seconds, the [ + ] will
move automatically.
4. Aim at center of [ + ], follow the path as shown in the figure.
Once steps 1-5 are complete, touch [ OK ] to exit calibrating
mode.

SWC Programing

The following controls are available for most vehicles:
1 2
Volume + Volume -
7 8
Home Preset +
Touch [ Enter ], the SWC menu will display.
U p t o 1 2 s t e e r i n g w h e e l c o n t r o l f u n c t i o n s c a n b e
programmed via the built-in SWC interface. Not all functions
may be supported for each vehicle.

Settings

] and the settings menu is displayed.
3 4
Mute Next
9 10
Preset - Band
Description
Select one that matches your location.
Select Local to receive only stations with extremely
strong signal.
Turn-ON the beep sound. Each time you press a button,
the unit beeps.
Turn-OFF the beep sound.
Calibrate the touch screen.
5 6
Prev Play
11 12
Source Answer
8