Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
5HVO52XXXD Series Fan
CUL Model NO. : 5HVO52XXXD
RETAILER NAME:
RETAILER ADDRESS:
8.3 kgs
18.3 lbs
Total fan weight with light
Advertisement
Related Manuals for Monte Carlo Fan Company 5HVO52 D Series
Summary of Contents for Monte Carlo Fan Company 5HVO52 D Series
- Page 1 Owner’s Guide and Installation Manual 5HVO52XXXD Series Fan CUL Model NO. : 5HVO52XXXD Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 8.3 kgs 18.3 lbs Total fan weight with light...
-
Page 2: Cautions And Warnings
Note: Suitable for use in wet locations when installed in a GFCI protected branch circuit. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2018 Monte Carlo Fan Company 10/2018... - Page 3 Place yoke cover on top housing of fan. Warning: Cross pin and keeper pin must be installed securely, failure to install them will result in serious injury. © 2018 Monte Carlo Fan Company 10/2018...
- Page 4 Outlet up into the outlet box. box. Make sure the studs protruding from the bottom of the Mounting bracket are installed with threads all the way through the bracket. © 2018 Monte Carlo Fan Company 10/2018...
- Page 5 Safety Cable in the U.S., Do Not Remove the outlet box. The splices after being made Knockouts In The Outlet Box. should be turned upward and pushed carefully up into the outlet box. © 2018 Monte Carlo Fan Company 10/2018...
- Page 6 Align the pull chains from fan with the pull cools down. chain guides on light fixture and then attach light fixture onto the switch housing of fan, aligning the holes and reinstall the set screws. © 2018 Monte Carlo Fan Company 10/2018...
- Page 7 Note: Reverse switch must be set either completely down or completely up for fan to function. If the reverse switch is set in the middle position, fan will not operate. © 2018 Monte Carlo Fan Company 10/2018...
-
Page 8: Troubleshooting
5.Remove light kit and check the plug connections if they are present. 6.If this fan uses remote controller, make sure dip switches are setting properly and make CAUTION: Make sure main power is turned off before entering switch housing and/or canopy. © 2018 Monte Carlo Fan Company 10/2018... - Page 9 Oct.2018 Mar.2019 9.3W...