Austin Hughes Electronics NAP-F21 User Manual page 27

< 4.5 > Options : Touchscreen & driver
TPC-21.5 Driver
Connect the USB cable from the USB port on the LCD to a computer. The touch screen supports
easy Plug-and-Play operations. There is no need to install additional drivers on the computer.
TRB / TCB Driver
Please follow the below steps to setup the touch screen:-
Step 1. Run the bundled CD disc or download the driver from the link below :
http://www.austin-hughes.com/downloads/UVDL/driver.html
Step 2. Double click the Setup.exe
Step 3. Follow the installation instruction to fi nish the setup
Step 4. After installation, run the TouchKit program & the "4 point calibration"
Please do the initial calibration
after the fi rst setup
< 4.6 > Options : DC Power
Model
Input rating
Input voltage:
Input range:
Input current
- No load
- Full load
Output rating
Output voltage:
Output current:
Effi ciency
UM-UV-621-F21-Q215V2
12V 24V
12-Volt 24-Volt
9 ~ 18V 18 ~ 36V
50 mA 50 mA
4950 mA 2450 mA
12-Volt 12-Volt
4.16A 4.16A
84% 85%
P.22
21.5" FHD LCD Display
48V 110 ~ 125V
48-Volt 110-Volt
36 ~ 75V 66 ~ 160V
50 mA 40 mA
1220 mA 993 mA
12-Volt 12-Volt
4.16A 8.4A
85% 92%
www.austin-hughes.com