LCD display solutions User Manual 21.5” FHD 1920 x 1080 LCD AP-F21 Aluminum front bezel NAP-F21 Front NEMA4 / IP65 OP-F21 Universal Mounting Open Frame Designed and manufactured by Austin Hughes UM-UV-621-F21-Q215V2 www.austin-hughes.com...
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content.
< Part 1 > < 1.1 > Package Content - AP / NAP-F21 AP-F21 / NAP-F21 21.5" FHD LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Mounting hardware X 1 pack...
Page 8
< 1.2 > Dimension - AP / NAP-F21 Front View Side View AP-F21 NAP-F21 Rear View UNIT : mm 1mm = 0.03937 inch Bottom View UM-UV-621-F21-Q215V2 www.austin-hughes.com...
< 1.3 > Panel Mount Installation - AP / NAP-F21 21.5" FHD LCD Display M4*50mm screw M4*6mm screw Mounting bracket x 8 pcs x 8 pcs x 4 pcs Hardware set part no. UV-BK#2 Steps ■ Install 4 mounting brackets with 8 x M4*6mm screws ■...
Page 10
< 1.3 > VESA mount Installation - AP / NAP-F21 M4 screw VESA mount ( 100*100mm ) ■ Hardware and M4*4 pcs for VESA mount are not provided UM-UV-621-F21-Q215V2 www.austin-hughes.com...
< Part 2 > < 2.1 > Package Content - OP-F21 21.5" FHD LCD Display OP-F21 21.5" FHD LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Basic I/O Power DVI-D HDMI AV3.0 upgrade I/O with advanced features Audio Power...
< 2.2 > Dimension - OP-F21 21.5” FHD LCD Display Front View Side View OP-F21 UNIT : mm Rear View 1mm = 0.03937 inch Bottom View UM-UV-621-F21-Q215V2 www.austin-hughes.com...
Page 14
< 2.3 > Installation - OP-F21 ( I ) Universal mount ( II ) VESA mount ( 100*100mm ) M4 screw Hardware and M4*4 pcs for VESA mounting are not provided UM-UV-621-F21-Q215V2 www.austin-hughes.com...
< Part 3 > < 3.1 > Product Specifi cations 21.5” FHD LCD Display Mechanical AP / NAP-F21 OP-F21 Design Front Panel Black, RAL 9005 Rear Casing Black, RAL 9005 Black, RAL 9005 VESA Mounting 100 x 100mm 100 x 100mm...
Page 16
Humidity 5~90%, non-condensing Shock 10G acceleration (11ms duration) Vibration 5~500Hz 1G RMS random AP / NAP-F21 OP-F21 Physical Specifi cation Product ( W x D x H ) 577.8 x 59.1 x 369.3 mm 574.8 x 52.6 x 366.3 mm 22.7 x 2.3 x 14.5 inch...
< 3.2 > On-screen Display Operation ( OSD ) 21.5” FHD LCD Display Power light Green = On Orange = Power saving Membrane Switch Function Power on / off LCD Display the OSD menu Scrolls through menu options and adjusts the displayed control (To auto adjustment by pressing the button for 5 seconds) Exit the OSD screen...
Page 18
< 3.2 > On-screen Display Operation ( OSD ) Audio Audio mode : Movie / Voice / Normal / Music mode to choose Volume : Adjust the volume of sound Bass : Set the value of bass sound Treble : Set the value of treble sound Balance : Set the balance value of treble and bass sound...
< 3.3 > How to Use Picture In Picture ( PIP ) / 21.5” FHD LCD Display Picture By Picture ( PBP ) < 3.3.1 > Picture in Picture ( PIP ) Mode Display the Sub screen in the Main screen. OSD Menu →...
Page 20
< 3.3.2 > Picture By Picture ( PBP ) Mode Display the Sub screen next to the Main screen. OSD Menu → MISC → PIP Mode → PBP Main screen Sub screen Size LCD Monitor Main / Sub screen 1920 x 1200 955 x 716 1920 x 1080 955 x 716...
< Part 4 > Options 21.5" FHD LCD Display < 4.1 > Option Table Options AP / NAP SDI *** S-Video * + Composite ( BNC ) Audio Touchscreen MCS multi-display control DC Power MIL-type / lockable connector TV ( Analog ) * About SDI The AD board comes standard with HDMI, DVI-D, VGA, S-Video, BNC, audio inputs and RC-1 remote controller.
< 4.2 > Options : 3G / HD / SD-SDI input Austin Hughes’ SDI input is an ideal solution for the broadcast- grade video and high resolution CCTV market. Designed for use with UltraView Full HD 1080p and ultra high resolution 1920 x 1200 LCD displays, Austin Hughes provides a SDI input module without using additional space or power and it comes standard with a 2-year warranty.
< 4.3 > Options : MCS 21.5” FHD LCD Display More control is always good. Especially when it is necessary and easy. Austin Hughes provides MCS solution to control the OSD of ( Multi-display Control ) various UltraView LCD display up to 64 units. The RS-232C is used for the communication between the PC and the fi...
< 4.4 > AV3.0 Upgrade Options : - AV ( S-Video + Composite, BNC - Audio ( Built-in Dual Stereo Speakers, 2W x 2 ) ( 3.5mm audio jacks for audio in & out ) Audio Power S-Video DVI-D HDMI out - in - in Video PC AV3.0 upgrade option comes with RC-1 remote controller x 1, please refer to P.20...
Page 25
How to Use RC-1 Remote Controller 21.5" FHD LCD Display POWER Switches on or off the TV MUTE Turn on or off the speaker INPUT Switch to signal input mode Select channels. For channel numbers 10 and above, 0- 9 enter the second digit within two seconds.
< 4.5 > Options : Touchscreen & driver F21.5" USB Touchscreen Specifi cation Model e-Resistive TPC-21.5 Multi-touch e-Capacitive Technology Projected Capacitive 5-Wire Resistive Capacitive Touch Point Single Single Input Type Finger or Capacitive Stylus Finger or Stylus Finger Resolution 2048 x 2048 2048 x 2048 2048 x 2048 Touch Point Accuracy...
Page 27
< 4.5 > Options : Touchscreen & driver 21.5" FHD LCD Display TPC-21.5 Driver Connect the USB cable from the USB port on the LCD to a computer. The touch screen supports easy Plug-and-Play operations. There is no need to install additional drivers on the computer. TRB / TCB Driver Please follow the below steps to setup the touch screen:- Step 1.
< 4.7 > Options : MIL-type or Lockable Connector Input Part no. MIL Standard MIL - type MS3470W8-33P MIL - DTL - 26482 DC Power Connector ( Male ) MS3470W14-15P MIL - DTL - 26482 ( Male ) There are several additional MIL DC and VGA connector types with varying design characteristics to meet cost considerations and to provide users with the most design fl...
< 4.8 > Options : TV ( Analog ) 21.5” FHD LCD Display Audio Power S-Video HDMI out - in - in Video PC For TV option : ( 1 ) The AD board comes standard with HDMI, VGA, S-Video, BNC, audio inputs and RC-2 remote controller.
Page 30
How to Use RC-2 Remote Controller INPUT MUTE -/-- FREEZE AUTO MENU SELECT ASPECT SLEEP ENTER BACK EXIT SWAP SOURCE POSITION AUDIO INPUT Select the source Switches on or off the TV Only use in TV mode. Select channels. For channel numbers 10 0 - 9 and above, enter the second digit within two seconds.
Page 32
The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2015 Austin Hughes Electronics Ltd. All rights reserved. UM-UV-621-F21-Q215V2 www.austin-hughes.com...