Epson PS-500 User Manual page 33

Pairing issues
When using the product for the first time, check the following:
1. Attach the PS-500 to the cradle to wake the PS-500 from battery protection mode.
2. Enable Bluetooth
3. Check smart device compatibility: epson.com/PSdevices
4. Ensure your smart device is connected to the Internet.
5. Remove any other product from the area that could interfere with the Bluetooth
If pairing is lost or the PS-500 has been paired with another smart device, check the following:
1. The PS-500 may already be un-paired.
If you need to un-pair your device, tap the screen twice, then press the [B] button to enter the Bluetooth
menu. Confirm your selection by pressing the [A] button.
2. The PS-500 already been deleted from PULSENSE View.
3. The PS-500 already been deleted in the Bluetooth® settings of your smart device.
4. Make sure Bluetooth
5. Check smart device compatibility:epson.com/PSdevices
6. Ensure your smart device is connected to the Internet.
7. Remove any other product that could interfere with the Bluetooth
®
communication on your smart device.
®
communication been enabled on your smart device.
®
communication.
®
communication
®
• 33