Operating buttons and functions
Contact point
[A] button
Start / Stop heart rate measurement.
[B] button
Check recorded data. Hold down [B] to return to the previous screen.
Contact point
Contact point for charging.
(
LEDs
Blue & Orange
The LEDs on the PS-500 light up or flash to indicate the current heart rate zone.
If you set your target in PULSENSE View, you can check your progress when the zone is displayed on the
screen. You can cycle through the measurements by pressing the [B] button.
TAP operation
Tap the screen once to turn the backlight on.
Tap the screen twice to return to the main menu.
Battery icon, Bluetooth icon, Vibration icon
A button
B button
LEDs
)
Set up and basic operation • 12