Epson PS-500 User Manual page 15

2
Charging the product.
2-1 Using a PC
Insert the cradle's USB cable into a free USB port on your PC.
If you are connecting the cradle via a USB hub it may not charge. Connect the cradle's USB port directly to
the USB port of the PC instead.
Note:
Some PC USB ports may not support the charging function.
2-2 Using an AC adapter
Connect the cradle to the optional AC adapter, then insert the AC adapter into a power outlet.
Note:
- An orange LED is shown while charging and the LED changes to blue when the PS-500 is fully charged
- Charging takes approximately 2.5 to 3.5 hours to complete; however, the duration may vary.
! Important
- Please note that even if not in use, the PS-500 should be charged at least once within a 6 month period.
Set up and basic operation • 15