Planet Networking & Communication Hot Spot WSG-403 User Manual page 43

HTTP Port
HTTPS Port
Administrator Idle-Timeout 5 Minutes
DHCP Server
DHCP Relay
DHCP Server IP Address
DHCP Server
DHCP Pool Starting
Address
Pool Size
Lease Time
Primary DNS Server
Secondary DNS Server
Email Server Redirect
IP Address or Domain
Name
Wireless Subscriber Gateway
Enter the HTTP port number. The HTTP port allowed
range is 80 or 8010 to 8060. For access the WSG-403
80
system under NAT, please tab the "http://HTTP Port IP
Address: Port Number".
Enter the HTTPS port number. The HTTPS port allowed
range is 443 or 4430 to 4440. For access the WSG-403
443
system, please tab the "https://HTTPS Port IP Address:
Port Number".
The idle time out valid range is 1-1440. If the idle time out
is set as 5 minutes, it means if the administrator doesn't
send packet in 5 minutes, the administrator will logout
automatically.
There are three types of DHCP Services.
DHCP Disable—Disable the DHCP server function.
Enable
DHCP Relay—Enable DHCP Relay function.
DHCP Server—Enable DHCP server function.
To route DHCP through an external server, the administrator needs to
enable the DHCP relay and assign a valid DHCP server IP address.
Empty Enter the IP address of DHCP server.
The WSG-403's DHCP server is turned on and running by default
when you install it in your network.
10.59.1.2 Enter the DHCP Pool Starting IP address.
253 The DHCP pool size range is 1 to 512.
300 The DHCP lease time. The DHCP lease time range is 1 to
Minutes 71582788 minutes.
168.95.1.1 Enter the IP address of the network's primary DNS server.
Empty Enter the IP address of a second DNS server on the
network.
To prevent some subscriber's original Email server may protect by
firewall or NAT network. WSG-403 provides an extra Email server
parameter to forward the subscriber's Email. The WSG-403 not only
forwards the subscribers' E-mail via other E-mail server but also
changes the SMTP header. The recipient of your E-mail sees the
message as if you sent it from your local Internet Service Provide, not
form the hotel or other place. Note: Before setting this sever, please
make sure the e-mail sever relay function is opened. It must not
exceed 50 characters.
Empty Enter the E-mail server IP address or domain name.
41