Table of Contents
Advertisement
5. PORT CONFIGURATION
The ports can be selected individually from the roll-up menu at the configuration site. The
following settings can be modified for each port:
Label
A name with a maximum of 15 characters can be entered here.
After Power Up switch
The ports state after a restart of the IPower Control can be defined here (on, off, last state)
Delay
A delay for the following port can be chosen here. That is, in case of a restart the following port
will be switched after the chosen delay (1-30 sec). E.g. a delay of 5 seconds for port 2 means
that port 3 will be switched 5 seconds after port 2.
Advertisement
Table of Contents
