Table of Contents
Advertisement
6. NETWORK CONFIGURATION
The following settings can be modified in the configuration menu:
Device Name
A name with a maximum of 15 characters
can be allocated here.
IP Settings
The IP settings of the IPower Control can
be modified here.
HTTP Port
If required, the port number of the internal
web server can be allocated here. Values
from 1 to 65534 are possible (default: 80).
After changing the port number the IPower
Control must be restarted. The modified
port number will be added to the IPower
Control's address (http:// "IP Address of
IPower
Control:Port
number"
e.g.
192.168.0.2:6)
TCP/IP settings by DHCP
Each time the IPower Control is restarted
it will be checked if a DHCP server is
available on the network. In this case the IP
settings will be requested and saved. If
there is no DHCP server on the network it
is advisable to disable this option.
Password
Access protection can be allocated here. If
access protection is required, both a user
and admin password with a maximum of 15
characters have to be defined.
An administrator is authorized to switch and
reset each port as well as modify the
settings of both ports and the IPower
control. The admin password is 'admin'.
A user is authorized to switch and reset each port. (A user is not authorized to modify the
settings of the ports or the IPower Control). The user password is 'user'.
Advertisement
Table of Contents
