Rectifier Specific Configurations - Rectifier RT9- 24V Installation, Operation And Technical Manual

Rack power system
Table of Contents

Advertisement

Installation, Operation and Technical Manual
It is possible to have both the single and three phase AC monitoring modules connected at
the same time. This can be useful where the AC output of an inverter running off the 48V
DC bus can be monitored at the same time as the three phase AC supply to the rectifiers.
AC Distribution
with 3  Monitor
Magazines of
AC-DC Converters
Batteries with
Circuit Breakers
Figure 3.3 System with additional 3 phase AC Monitoring; simultaneous monitoring

3.1.2 Rectifier Specific Configurations

A typical mechanical arrangement of a system comprising 4 rectifiers in a mini shelf is
shown in Figure 3.4. It consists of 4 rectifiers (2U total), and a MCSU-4 shelf, for a total of
3U.
The arrangement shown is designed to fit into a standard 19" rack. Other
configurations are equally possible.
Figure 3.4 Typical 4 rectifier modular power supply with MCSU-4
158-1872-01
System Controller
MUIB
(Supplies System
Controller)
DC Bus
DC Distribution
of single phase inverter also possible
Local Comm. Port
Remote Comm. Port
Remote Alarms
Battery Cell Monitor
with 1  Inverter
and AC Monitor
7
Rectifier Technologies
and Ambient
Temp. Sensor
DC Loads
19-Feb-14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcsu-4

Table of Contents