Three Phase Ac Monitoring Screens - Rectifier RT9- 24V Installation, Operation And Technical Manual

Installation, Operation and Technical Manual
Single phase AC voltage.
Single phase AC current
Single phase AC frequency

6.6.2 Three Phase AC Monitoring Screens

In a system wired for 3 phase input with an AC monitor module, it will be necessary to
activate the 3 phase AC monitoring selection screen via the "Auxiliary Units" sub-menu
(towards the end of this menu). To enable, select "On" under the "3-ph AC Monitor" menu
item. Once the AC monitor is enabled, the following screens will appear immediately after
the "Ambient Temp" screen or single phase monitoring screens (when activated):
AC voltage of phase 1
AC voltage of phase 2
AC voltage of phase 3
AC Current of phase 1
AC Current of phase 2
AC Current of phase 3
AC Frequency
158-1872-01
1ph AC Current
1ph AC Frequency
3ph AC1 Current
3ph AC2 Current
3ph AC3 Current
3ph AC Frequency
52
Rectifier Technologies
1ph AC Volts
245V
52A
50.0Hz
3ph AC1 Volts
245V
3ph AC2 Volts
243V
3ph AC3 Volts
246V
28A
29A
32A
50.2Hz
19-Feb-14