Standby (Optional) - oticon CIC Instructions For Use Manual

Below you can see a description of the programs available in your hearing instrument.
Prg. 1:
Prg. 2:
Prg. 3:
Prg. 4:
Using 2 instruments
If you have two Ino Pro instruments the push-button on one instrument can be pro-
grammed to change the program on both hearing instruments (Binaural Coordination).
This means, when you adjust the program for one instrument, it automatically adjusts
the other.*
Binaural Coordination enabled.
*Not available for CIC, MIC and ITC Power instruments.
14

Standby (optional)

If your hearing instrument has a push-button, push the button for a minimum of
3 seconds to set the instrument in standby mode.
To reactivate the instrument, push the button brieftly again.
Use the standby function if you need to silence the instrument.
ImporTanT noTICe
Do not use the stand-by function as a switch off as the hearing instrument still draws
current from the battery in this mode.
PUSH
3 sec
15