standby (optional)
If your hearing instrument has a push-button, push the button for a minimum of
3 seconds to set the instrument in standby mode.
To reactivate the instrument, push the button brieftly again.
Use the standby function if you need to silence the instrument.
IMportant notIce
Do not use the stand-by function as a switch off as the hearing
instrument still draws current from the battery in this mode.
PUSH
3 sec
14
Volume control (optional for Ite only)
Your ITE instrument may have a Volume Control wheel. The Volume Control wheel can
be turned with the tip of a finger and can be rotated infinitely both ways.
Volume
Control Wheel
15