Volume Control (Optional); Standby (Optional) - oticon miniRITE Instructions For Use Manual

Volume Control (optional)

Only when using two Ino Pro instruments a volume control can be activated. The volume
control allows you to adjust the volume in specific listening situations to the level you
feel comfortable with.
When pressing the push-button on one instrument, the volume is adjusted in both
instruments simultaneously.
To increase volume, shortly press the push-button on the RIGHT ear instrument.
To decrease volume, shortly press the push-button on the LEFT ear instrument.
When the hearing instrument is turned on, it starts up at a preferred volume level.
When adjusting the volume control to the preferred level, this is indicated by a beep.
16

Standby (optional)

Press the button for a minimum of 3 seconds to set the instrument in standby mode.
To reactivate the instrument, push the button shortly again.
Use the standby function if you need to silence the instrument
while you have the instrument on.
WaRnIng
Do not use the standby function as a switch off as the hearing instruments still draws
current from the battery in this mode.
Push
3 sec
17