Interface - Autobackup - D-Link DRO-210i User Manual

DRO-210i Web Configuration
WAN2 configuration is same as that of WAN1. Refer WAN1 Setting for
configuration of WAN2.
3.1.5

Interface - AutoBackup

For WAN1 settings Click on Interfaces > AutoBackup and the web page
opens as shown below:
This Web Page is used to configure primary and backup relation between
WAN interfaces of router.
Backup-Mode:
1. Disable - No backup activity will be done for this interface.
2. Enable - If the primary interface goes down, the backup interface
configured for this will be connected automatically. In addition, all
features pertaining to the backup interface will be applied automatically.
DRO-210i User Manual Page 3-9