Table of Contents
Advertisement
DRO-210i Web Configuration
3.4.5
NAT - SIP-ALG
Click on NAT > SIP-ALG to get the web page as shown below:
SIP ALG enables SIP phones on the LAN side to make calls across the
Internet. User needs to configure the Port number for the SIP (Session
Initiation Protocol) in the web page. The LAN clients for Session
Initiation Protocol use this port number only. In other words, the Real
Time Protocol will not use this port number. User can configure a
maximum of 20 ports.
The recommended maximum number of simultaneous SIP calls is 20.
DRO-210i User Manual
Page 3-34
Advertisement
Table of Contents
