Interface - Wan1 - D-Link DRO-210i User Manual

DRO-210i Web Configuration
3.1.3

Interface - WAN1

For WAN1 settings Click on Interfaces > WAN1 and the web page opens
as shown below:
This page allows you to configure the WAN interface. The WAN interface
can operate in 3 modes: Static, Dynamic and PPPoE.
WAN Settings - Static
Select this option to set static IP information. You will need to enter the IP
address, subnet mask and gateway address provided to you by your ISP.
The default gateway field specified here will be used by Load
balancing feature to route packets through this interface.
DRO-210i User Manual Page 3-4