Routing - Policy-Based - D-Link DRO-210i User Manual

Load balancing router

Hide thumbs Also See for DRO-210i:

Table of Contents

DRO-210i Web Configuration

3.2.3

Routing – Policy-Based

Click on Routing > Policy-Based to get the web page as shown below:

Policy-Based Routing enables a user to define policies to achieve efficient

traffic distribution or load balancing. A set of parameters such as Source

IP, Destination IP, Inbound Interface, Protocol, Src/Dest Ports are used to

identify and direct the traffic out of a specific Outbound Interface.

Policy Based Routing: Clicking on this check box will enable Policy

routing in the Router.

Outbound Interface: The network traffic which matches with all the

below policy parameters will be sent out of this interface.

Policy Parameters: These parameters of network traffic are used to

identify whether the above-configured Outbound Interface should be used

for this traffic.

DRO-210i User Manual

Page 3-15

Table of Contents