Table of Contents
Advertisement
DRO-210i Web Configuration
connections. When a serious intrusion attempt is detected (that is, when a
large number of packets consistent with a commonly used intrusion
method are detected by the Router) the IP address, the protocol used, and
the corresponding port number is determined and entered into the Router
Intruder Blacklist. Once the intruder information is entered, the Routers
firewall will block packets from this location from crossing the Router
(from the WAN to the LAN, from two computers on the LAN, or from the
LAN to the WAN).
Source IP - The IP address of a computer or device that will not be
allowed to make a connection from the WAN to the Router is displayed
here.
Destination IP - The IP address of the computer or device that the
intruder has tried to connect to is displayed here.
Destination Port/ICMP Type - The port number or ICMP Type that an
intruder used to attempt to make a connection is displayed here.
DRO-210i User Manual
Page 3-80
Advertisement
Table of Contents
