Table of Contents
Advertisement
DRO-210i Web Configuration
RIP page allows user to configure the RIP Routing Protocol. In the web
page, user can also customize RIP settings for every interface.
RIP Version:
RIP version can be either 1 or 2.
Redistribute:
Static and Connected routes can be redistributed into the RIP table.
RIP Daemon:
Start or Stop the RIP Daemon.
Interface Settings:
Configure interface specific RIP settings.
Interface Name:
Name of the interface for which RIP can be configured.
Enable:
Enable or disable RIP on the particular interface.
Send Version:
The interface can use the global default RIP version to send RIP messages,
or be configured to use a specific RIP version.
Receive Version
The interface can use the global default RIP version to receive RIP
messages, or be configured to use a specific RIP version.
V2 Broadcast:
When the send RIP version for an interface is set to use RIP 2, user can
choose to broadcast RIP 2 messages instead of the default multicast
behavior.
DRO-210i User Manual
Page 3-14
Advertisement
Table of Contents
