Keypad Controls And Indicators - NAPCO XP-400 Express Series User Manual

Key Used to enable
special functions and op-
tions. Press and then
the corresponding Spe-
cial Function number Op-
tion (See Special Func-
tions, Page 10)
Bypass Key Used to
bypass zones. Press
Bypass and the corre-
sponding zone number,
and then Arm system.
Emergency Keys Press
simultaneously to signal
an emergency condition.
$ $
Press + for
Auxiliary Emergency or
3 3
+ for Police Emer-
gency. (Programmable)
Numerical Keys 1-9, 0. Used to enter
User Codes, Zone numbers, etc.
' '
Key Press to display any present
System troubles. Only available when
' '
System Light is lit.
(See System troubles, Page 12)

Keypad Controls and Indicators

Armed Light will light when system is Armed,
and will flash when system is in Alarm
Ready Light will light when all zones are secure
$50('
and system is ready to be Armed.
5($'<
'
6<67(0
' '
sounder will pulse to indicate that a system trou-
=21( 
ble is present.
(See System troubles, Page 12)
=21( 
=21( 
=21( 
Zone Lights (1 through 4) will light to indicate
that the corresponding Zone is open, and will
flash to indicate a zone in alarm.
NAPCO

codes, reset Alarm Memory, etc..
System Light will light and the Keypad
Key - (Reset) used to clear miss-entered
5