Preparing the Answering System
Greeting Message
You can record a personal greeting message of up to 2 minutes. If a
greeting message is not recorded, one of two pre-recorded greetings will
be played when a call is received (p. 23).
All messages (greeting, incoming, etc.) are stored in digital memory
(p. 23). The total recording time is about 12 minutes.
We recommend that you record a brief greeting message (see
sample below) in order to leave more time for recording new
messages.
To record a greeting message
(GREETING)
1
Press and hold
"Record greeting after the beep" is
heard.
2
Talk clearly, about 8 inches
(20 cm) away from the MIC
(microphone).
≥The base unit display shows the
elapsed recording time.
≥If you record for over 2 minutes,
the unit will automatically stop
recording.
3
When finished, press
≥To check the recorded greeting,
press (GREETING) briefly.
≥To change the message,
start again from step 1.
Greeting message sample
"Hello, this is (your name and/or number). Sorry I cannot take your
call. Please leave a message after the beep. Thank you."
22
until
(GREETING)
(ERASE)
(STOP)
.
MIC
To increase the volume,
press VOLUME (^).
To decrease, press
VOLUME (_).
(STOP)