Denon D-M51DVS Operating Instructions Manual page 62

ENGLISH
(3) Auto tuner presets
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels 1 to 40.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the "Manual tuning" operation to tune in the station, then preset it
using the manual "Preset memory" operation.
1 Using the TUNER function, press and
hold the MENU/SET button of the main
unit for 2 seconds or longer.
• "AUTO PRESET?" and "–: NO/+:
START" will alternately appear on the
display of the main unit.
• Press the TUNING – button to cancel.
2 Use the TUNING + button to select
"START".
"SEARCH" flashes on the display and
searching begins.
"COMPLETED" appears once searching
is completed.
(4) Listening to preset stations
Example: Listening to the station preset at number P03 (This operation is only possible from the remote control unit.)
DVD SURROUND RECEIVER ADV-M51
V I D E O
ON STANDBY
Set the remote
control selector
switches to A/V
and TUNER.
TUNER TV / VCR
A / V DVD IN/SURR.
SYSTEM MD IN/SURR.
CDR TAPE
The preset buttons on the remote control unit (TUNER CH "+" and
"–") can be used at any time.
62
MENU/SET
Main unit
+
Main unit
1
D I G I T A L
CONPACT
MP
Radio
VIRTUAL SPEAKER PRO LOGIC S U R R O U N D DIGITAL VIDEO
SURROUND SELECT
PUSH-PARAM
BAND
MENU SET
TONE SDB
VOLUME
FUNCTION
PHONES
OFF ON
VCR
REC
SLEEP NTSC/PAL TITLE TIME
SOURCE TV IN T V
ENTER CHARAC. EDIT/MENU
CLEAR A-B REPEAT SLIDE MODE ZOOM
- +
TV CH TV CH
RDS PTY CT CD SRS RT
PROG/DIRECT REPEAT RANDOM SEARCH MODE
MODE MEMO BAND
TUNING /
DVD TUNER D.AUX TV VOL
+
1 2 3
MD/LINE-1 TAPE /LINE-2
1
-
4 5 6
5CH STEREO AUTO DECODE TUNER
+
7 8 9
1
CH
DIRECT STEREO VIRTUAL
-
+ 10
0
CALL
/10
TEST TONE INPUT MODE SURROUND FUNCTION
TUNER TV / VCR
A / V DVD IN/SURR.
SYSTEM MD IN/SURR.
CDR TAPE
DVD SURROUND RECEIVER ADV-M51
V I D E O
ON STANDBY
1 Use the "+" and "–" preset buttons to select preset number
"3" or press the "3" button on the numeric keypad to display
preset number "P03".
The "+" and "–" buttons on the main unit can be selected
when the preset mode has been set.
- +
Main unit
The functions of the "+" and "–" buttons on the main unit change
according to whether the tuning or preset mode is set. When the
tuning mode is set, you can switch to the preset mode by pressing
the "+" button while pressing the BAND button.
BAND
Main unit
2
D I G I T A L CONPACT
MP
Radio VIRTUAL SPEAKER PRO LOGIC DIGITAL VIDEO
S U R R O U N D
SURROUND SELECT
PUSH-PARAM
BAND
MENU SET
TONE SDB
VOLUME
FUNCTION
PHONES
1
TUNER
+
D.AUX
3
CH
-
Remote control unit
+
Main unit