Cautions On Handling; Features - Denon D-M51DVS Operating Instructions Manual

WARNING:
• When installing the speaker systems on the ceiling or wall, to ensure safety, have specialists do the installation work.
• Be sure to fasten the speaker cords to a wall, etc., to prevent people from tripping over them or otherwise pulling on them accidentally,
causing the speaker systems to fall.
• Be sure to check for safety after installing the speaker systems. Afterwards, perform safety inspections at regular intervals to be sure there
is no danger that the speaker systems will fall. Denon will accept no responsibility for damages or accidents caused by inappropriate choice
of the place of installation or improper installation procedures.

3 CAUTIONS ON HANDLING

(1) DVD SURROUND RECEIVER
• Switching the input function when input jacks are not connected
A clicking noise may be produced if the input function is switched when nothing is connected to the input jacks. If this happens, either turn
down the MASTER VOLUME control or connect components to the input jacks.
• Muting of PRE OUT jacks, HEADPHONE jack and SPEAKER terminals
The PRE OUT jacks, HEADPHONE jacks and SPEAKER terminals include a muting circuit. Because of this, the output signals are greatly reduced
for several seconds after the power switch is turned on or input function, surround mode or any other-set-up is changed. If the volume is turned
up during this time, the output will be very high after the muting circuit stops functioning. Always wait until the muting circuit turns off before
adjusting the volume.
• Whenever the power switch is in the STANDBY state, the apparatus is still connected on AC line voltage.
Please be sure to unplug the cord when you leave home for, say, a vacation.
(2) SPEAKER SYSTEM (D-M51DVS only)
2 SC-A3L
• Note that color blotching may occur on a TV, etc., due to interaction with the speaker system if there is a magnet or an object generating
magnetic force nearby.
Examples: (a) When there are magnets on the door of the rack, stand, etc.
(b) When a health device, etc., equipped with magnets is placed nearby.
(c) When toys or other objects using magnets are placed nearby.
• Note that the illustrations in this instructions may differ from the actual set for explanation purposes.
• Be sure to keep the operating instructions.
After reading these operating instructions, store them in a safe place. We also recommend filling in the necessary items on the back cover.
2 DSW-3L
• The built-in amplifier of the active subwoofer (DSW-3L) includes a muting circuit. The output signal is strongly attenuated for several seconds
after the power is turned on. If the volume is adjusted during this time, the output may be extremely high when the muting circuit is deactivated.
Be sure to wait for the muting circuit to be deactivated before adjusting the volume.
• Note that color blotching may occur on a TV, etc., due to interaction with the subwoofer if there is a magnet or an object generating magnetic
force nearby.
Examples: (a) When there are magnets on the door of the rack, stand, etc.
(b) When a health device, etc., equipped with magnets is placed nearby.
(c) When toys or other objects using magnets are placed nearby.
• Note that the illustrations in this instructions may differ from the actual set for explanation purposes.
• Be sure to keep the operating instructions.
After reading these operating instructions, store them in a safe place. We also recommend filling in the necessary items on the back cover.
WARNING:
• Be sure to fasten the power cord to a wall, etc., to prevent people from tripping over it or otherwise pulling on it accidentally, causing the
subwoofer to fall.

4 FEATURES

The ADV-M51 combines an AV amplifier and DVD player, the core
components of a home theater system, into a single compact,
stylish body. The system takes up little space, and the aluminum
front panel and half mirror of the display make for an elegant
design that blends in nicely with the décor in your room.
1. 2-channel power amplifier with Dolby Virtual Speaker
compatibility
The ADV-M51 is equipped with two 35W (6 Ω/ohms 1kHz, T.H.D.
10%) power amplifiers that make it compatible with new Dolby
Virtual Speaker technology for recreating a 5.1-channel
environment virtually using a 2-channel configuration. (Dolby
Virtual Speaker is an proprietary technology of Dolby Laboratories.)
A high performance digital signal processor enables playback of
Dolby Digital and DTS multi-channel surround signals in the Dolby
Virtual Speaker mode. Surround sound can be achieved with the
Dolby Virtual Speaker mode for CDs and other 2-channel sources
in combination with the Dolby Pro Logic II decoder.
2. DENON's unique sound field simulation using the DSP
The ADV-M51 is compatible with the Rock Arena, Jazz Club and
Video Game modes.
3. High performance DVD drive
The ADV-M51 is compatible with various functions offered by DVD
sources, including multiple audio (up to 8 languages), multiple
subtitle (up to 32 languages), multiple angle playback, viewing
restriction, etc.
4. Quick setup and on-screen display compatibility
DVDs can be enjoyed simply by selecting the TV and speaker
configuration to be used. The system can be set up using an on-
screen display function.
5. Remote control unit with preset memory function
The ADV-M51 comes with a remote control unit equipped with a
preset memory function including the remote control operation
codes for D-M31 series MD recorders, cassette decks and
DENON remote control compatible components as well as the
remote control operation codes of other major brands of TVs and
video decks.
6. Convenient system functions
When system connections are made with a D-M31 series MD
recorder and cassette deck, such system functions as auto
function selection, synchronized
recording/playback can be performed easily.
ENGLISH
recording and timer
5