Error Codes - Canon EOS M2 Instruction Manual

Error Codes

Error number
Cause and countermeasures
Number
Communications between the camera and lens is faulty.
Clean the lens contacts.
01 
Clean the electrical contacts on the camera and lens, use a
Canon lens, or remove and install the battery pack again
(p.22, 23, 34).
Card cannot be accessed. Reinsert/change card or format
card with camera.
02

Remove and insert the card again, replace the card, or format
the card (p.34, 57).
Cannot save images because card is full. Replace card.
04 
Replace the card, erase unnecessary images, or format the
card (p.34, 254, 57).
Sensor cleaning could not be performed. Turn the camera
off and on again.
06

Operate the power button (p.37).
An error prevented shooting. Turn the camera off and on
10, 20
again or re-install the battery.
30, 40
50, 70 
Operate the power button, remove and install the battery pack
80, 99
again, or use a Canon lens (p.37, 34).
An error prevented shooting. Turn the camera off and on
again or re-install the battery.
60

The lens movement may be obstructed. Turn the camera off
and on again, taking care not to touch the lens.
* If the error still persists, write down the error number and contact your nearest
Canon Service Center.
If there is a problem with the camera, an error
message will appear. Follow the on-screen
instructions.
Error Message and Solution
335