Canon EOS M2 Instruction Manual page 35

Possible shots
Removing the Battery and Card
Installing and Removing the Battery and Card
5
Check the number of possible shots.

When you set the power to <1>, the
remaining number of images you can
record to the card will be displayed on the
LCD monitor.
1
Set the power to <2>.
2
Open the cover.

Make sure the LCD monitor and
access lamp are off, then open the
cover.

If [Recording...] is displayed, close the
cover.
3
Remove the battery.

Press the battery lock lever as shown by
the arrow and remove the battery.

To prevent short circuiting of the battery
contacts, be sure to attach the provided
protective cover (p.32) to the battery.
4
Remove the card.

Gently push in the card, then let go to
eject it.

Pull the card straight out.
5
Close the cover.

Press the cover until it snaps shut.
35