Remote Control Shooting - Canon EOS M2 Instruction Manual

Remote Control Shooting

Remote Controller RC-6 (Sold Separately)
This Remote Controller enables you to take pictures wirelessly up to approx.
5 meters/16.4 feet from the front of the camera. You can either shoot
immediately or use a 2-sec. delay.

Set the self-timer to <Q> (p.126).

Point the Remote Controller toward the camera's remote control sensor
and press the transmit button.

The camera will autofocus.

When focus is achieved, the self-timer lamp will light up and the picture will
be taken.

The picture is not taken until focus is achieved.

Fluorescent or LED lighting may cause camera misoperation by triggering the
shutter inadvertently. Try to keep the camera away from such light sources.

If you point a remote controller for a TV set toward the camera and operate it,
it may cause camera misoperation by triggering the shutter inadvertently.

Remote Controller RC-1/RC-5 (sold separately) can also be used.

The Remote Controller can also be used for shooting movies (p.175). Remote
Controller RC-5 cannot be used to take still photos in movie shooting modes.
Remote control sensor
295