Canon EOS M2 Instruction Manual page 21


Avoid storing the camera where there are chemicals that result in rust
and corrosion such as in a chemical lab.

If the camera has not been used for an extended period, test all its
functions before using it. If you have not used the camera for some time
or if there is an important shoot such as a foreign trip coming up, have
the camera checked by the nearest Canon Service Center or check the
camera yourself and make sure it is working properly.

When you detach the lens, the image sensor will be exposed. To
prevent scratching the image sensor, do not touch the image sensor.

If you use continuous shooting or movie shooting for a prolonged
period, the camera may become hot. This is not a malfunction.
LCD Monitor

Although the LCD monitor is manufactured with very high precision
technology with over 99.99% effective pixels, there may be a few dead
pixels displaying only black or red, etc. among the remaining 0.01% or
less pixels. Dead pixels are not a malfunction. They do not affect the
images recorded.

If the LCD monitor is left on for a prolonged period with the same screen
displayed, screen burn-in may occur where you see remnants of what
was displayed. However, this is only temporary and will disappear when
the camera is left unused for a few days.

The LCD monitor display may seem slow in low temperatures, or look
black in high temperatures. It will return to normal at room temperature.

After changing the LCD monitor's brightness settings, the display may
look a little coarse, depending on the subject. This is not a malfunction
and will not affect the recorded image.
Handling Precautions
21