e Adjustment of Printing Effects
Brightness
The image brightness can be adjusted.
Adjust levels
When you select [Manual], you can change the
histogram's distribution and adjust the image's
brightness and contrast.
With the Adjust levels screen displayed, press the
<B> button to change the position of the [h].
Press the <Y> <Z> keys to change the shadow
level (0-127) or highlight level (128-255).
kBrightener
Effective in backlit conditions that can make the subject's face look dark.
When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective for images shot using flash, where the subject has red eye. When
[On] is set, the red eye will be corrected for printing.
The [kBrightener] and [Red-eye corr.] effects will not be reflected on the
screen.
When you select [Detail set.], you can adjust the [Contrast], [Saturation],
[Color tone], and [Color balance]. To adjust the [Color balance], change the
values: B is for blue, A for amber, M for magenta, and G for green. The
image's color balance will be corrected towards the selected color.
If you select [Clear all], all the printing effect settings will be reverted to their
defaults.
In step 4 on page 273, if the [ze] icon
is displayed brightly when you select a
printing effect, you can press the <B>
button to adjust the printing effect. What can
be adjusted or what is displayed will depend
on the selection made in step 4.
wPrinting
275