Product Specifications - Craftsman 320.28212 Operator's Manual

PRODUCT SPECIFICATIONS
Rating 6.5 Amps
No load Speed 15000-28000RPM
Peak HP 1.25
Input 120-volts, 60Hz AC
Collets/Nuts and Cutting Bit Shank Diameters 1/4 in.
Base Diameter 3-5/8 in.
Sub Base Opening (Diameter for cutting bit use) 1-1/2 inches
Depth of Cut 1 inch (25.4mm)
NOTE: Before attempting to use your router, familiarize yourself with all of the
operating features and safety requirements.
Your palm router has a precision-built electric motor, which should only be
connected to a 120-volt, 60-Hz AC ONLY power supply (normal household
current). Do not operate on direct current (DC). This large voltage drop will cause
a loss of power and the motor will overheat. If the router does not operate when
plugged into a correct 120-volt, 60-Hz AC ONLY outlet, check the power supply.
This router has a10-ft., 2-wire power cord (no adapter needed).
This Palm Router has the following features:
1. 6.5 Amp, 1-1/4 peak HP, variable-speed motor runs at 15,000 to 28,000
RPM (no-load speed).
2. Variable Speed Dial for matching the motor speed to the workpiece material
and bit size.
3. Micro-adjust knob with scale cast in the motor housing for easily adjusting
the cutting height.
4. Compact motor housing constructed of Cast Aluminum / High Density
Nylon/Overmold for strength and user comfort.
5. 2 LED worklights provide high visibility of the bit and workpiece.
6. Depth scale for accurate set-up
7. Spindle lock for easy, one-wrench bit changes.
8. 1/4-in. self-releasing collet/nut.
9. Detachable, two-handle base features ergonomically designed handles
with overmold for comfort and maximum control with reduced vibration.
10.3 integrated circular routing holes in the detachable base for conveniently
routing circles and arcs (radii: 2-inch, 2-1/2-inch, 3-inch).
11. Ball bearings throughout the motor for smooth, efficient operation and long life.
28212 Manual_Revised_07-0713 Page 14