Download Table of Contents Print this page
Craftsman 315.115860 Operator's Manual

Craftsman 315.115860 Operator's Manual

19,2 volt handheld inflator digital gauge
Hide thumbs Also See for 315.115860:


Model No.
To reduce the risk of injury,
the user must read and understand the
operator's manual before using this
Help Line: 1-800-932-3188
and Co.,
IL 60179
Visit the Craftsman
web page:
10-23-06 (REV:00)
Save this manual
for future


Table of Contents

Summary of Contents for Craftsman 315.115860

  • Page 1 BATTERIES AND CHARGERS SOLD SEPARATELY Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 Visit the Craftsman web page: 983000-795 Save this manual for future reference 10-23-06 (REV:00)
  • Page 2 If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN iT TO ANY SEARS STORE OR OTHER CRAFTSMAN OUTLET iN THE UNITED STATES FOR FREE REPLACEMENT. If this Craftsman tool is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.
  • Page 3 [] Eye protection is required to guard against flying WARNING! READ AND UNDERSTAND ALL fasteners and debris which could cause severe eye INSTRUCTIONS. Failure to follow all instructions injury. listed below, may result in electric shock, fire and/ [] Do not wear loose clothing or jewelry.
  • Page 4 Never point any handheld inflator toward yourself SERVICE or others. [] Handheld inflator service must be performed only [] Keep the exterior of the handheld inflator dry, clean, by qualified repair personnel. Service or maintenance and free from oil and grease. Always use a clean performed by unqualified personnel may result in a risk cloth when cleaning.
  • Page 5 [] An extension cord should not be used unless WARNNNG! READ AND UNDERSTAND ALL absolutely necessary. Use of improper extension INSTRUCTIONS. Failure to follow all instructions cord could result in a risk of fire and electric shock. If listed below, may result in electric shock, fire and/or extension cord must be used, make sure: serious personal injury.
  • Page 6 Someof the following symbols maybe usedon this product.Please studythemandlearntheirmeaning. P roper interpretation ofthesesymbols willallowyoutooperate the product b etterandsafer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Current Amperes Hertz Frequency (cycles per second) Watt Power Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current No Load Speed...
  • Page 7 Thefollowing signal w ordsandmeanings a reintended to explain thelevels ofriskassociated w iththisproduct. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will result DANGER: in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could result WARNING: in death or serious injury.
  • Page 8 PRODUCT SPECIFICATIONS Motor .............. 19.2 Volt, DC Charger Input ........120 V, 60 Hz, AC only Hose ..........18 in. with vehicle chuck Charge Rate ............. 1 hour Air Pressure ....200 PSI, 13.7 BAR, 14 KG/CM2 max. Gauges ....Digital readout (PSI, Kg/Cm 2, and BAR) AIR HOSE - ON/RESET + DIGITAL...
  • Page 9 UNPACKING WARNING: If any parts are damaged or missing This product has been shipped completely assembled. do not operate this product until the parts are re- [] Carefully remove the product and any accessories from placed. Failure to heed this warning could result in the box.
  • Page 10 LED FUNCTIONS OF CHARGER voltage range, the red LED should come on. If the red LED does not come on after 30 minutes, this may LED WILL BE ON TO INDICATE STATUS indicate a defective battery pack that should be CHARGER AND BATTERY PACK:...
  • Page 11 Refer t o CHARGING A COOLBATTERY P ACK fornormal TO REMOVE BATTERY PACK recharging o fbatteries. I f thecharger d oesnotcharge See Figure 3. yourbattery packundernormal c ircumstances, return [] Locate the latches on the side of the battery pack and boththebattery packandcharger t o yournearest Sears depress to release the battery pack from handheld inflator.
  • Page 12 [] Push air chuck down so that the threaded section of the INSTALLING/REMOVING AIR HOSE valve stem is inside the air chuck. See Figure 5. [] Clamp the end of the air chuck down onto the valve [] Remove battery pack from handheld inflator. stem by pressing air chuck clamp down until it stops or [] Loosen adaptor attachment knob slightly by turning...
  • Page 13 HiGH VOLUME ADAPTOR See Figures 11 - 12. The high volume adaptor can be useful in inflating small, low pressure items such as beach balls and children's toys. Like most adaptors provided for the handheld inflator, the high volume adaptor can be used either with or without Fig.9 the air hose and air chuck.
  • Page 14 SWITCHTRIGGER ADAPTOR STORAGE See Figure 14. See Figure 13. When not in use, adaptors provided with the handheld To turn the handheld inflator ON, depress and hold the inflator (except those that come with the high volume switch trigger. To turn it OFF, release the switch trigger. adaptor) can be placed in the storage area located on the base.
  • Page 15 To set pressure gauge for automatic shut off: PRESSURE [] With gauge ON, press and hold down ( + ) or ( = ) buttons to select desired shutoff pressure. GAUGE NOTE: Numbers will flash while setting pressure. BUTTON Holding buttons down will make the pressure number increase faster.
  • Page 16 WARNING: When servicing, use only identical Avoid using solvents when cleaning plastic parts. Most Craftsman replacement parts. Use of any other part plastics are susceptible to damage from various types of may create a hazard or cause product damage. commercial solvents and may be damaged by their use.
  • Page 18 CRAFTSMAN HANDHELD INFLATOR - MODEL NUMBER 315.115860 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your handheld inflator or when ordering repair parts. SEE BACK...

Table of Contents