Serial Port - Commodore Amiga A1200 User Manual

8-2
SERIAL Port
SERIAL Port
Connector type: D825 male
13
14 25
In the following table, column two gives the Arniga pin assignments.
Columns three and four give pin assignments for other commonly
used connections; the information in these two columns is given for
comparison only.
Caution Pins 9 and 10 on the Amiga serial connector are used
for external power. Connect these pins ONLY if
power from them is required by the external device.
The table lists the power provided by each of these
pins.
Pin 7 is the system ground. Do not connect this to
shield ground on Pin 1.