Scart Televisions; Connecting Optional Equipment; Audio Connection - Commodore Amiga A1200 User Manual

1-10 Connecting Optional Equipment
Audio output from the Amiga will use the television's speaker(s).
You may also connect the Amiga audio outputs as described in the
"Audio Connection" section.
SCART Televisions
Use a SCARTIRGB adapter cable to connect the Amiga to
equipment with a SCART connector. Insert the 23-pin end of the
cable into the VIDEO port on the Amiga and the RCA plugs into the
left and right Amiga audio jacks. Insert the SCART connector on
the other end of the cable into the connector on the equipment.
Audio output from the Amiga will use the television's speaker(s) ..
You may also connect the Amiga audio outputs as described in the
"Audio Connection" section.
Note Since the definition of the SCART interface varies
somewhat among TV manufacturers, consult an
electronics or computer dealer to get the proper
SCART adapter cable for your TV.
Connecting Optional Equipment
If you have tested your Amiga system after making the basic
connections, turn it off before connecting any other items. Never
attempt to connect or disconnect anything while the power is on.
Audio Connection
Two RCAjacks (female connectors) labeled R. AUDIO and
L. AUDIO connect the Amiga's left and right sound
channels to a monitor or audio equipment. You need to
connect these to hear sound from your Amiga unless you
are using an RF connection to a TV or VCR.