OPERATING THE LOADER
27
SPILL GUARD (if equipped)
4. The other fork can be installed using the same
procedures.
The spill guard system prevents the object in the bucket
from falling to the operator's space.
When the operator operates the control lever to the roll
back position at the upper most boom position, this
system restricts the bucket roll back movement.
A Check the motion of spill guard function, before
operating the loader.
During operation, the spill guard will operate from the
point equal to or higher than height (L).
((L) depends on the length of the connecting rod.)
(L) 840 mm [LA805]
1280 mm [LA1055]