Suzuki 2006 GSF1200AK6 Supplementary Service Manual page 31

30 GSF1200AK6/SAK6 ('06-MODEL)
Step 7
The ABS indicator light does not go off
1) Turn the ignition switch to OFF.
2) Remove the left frame cover. (!GSF1200K6/SK6 9D-5)
3) Remove the fuse box mounting bolt. (!Page 28)
4) Open the fuse box and inspect the ignition fuse 1.
Ignition fuse: 15 A
Is the ignition fuse OK?
YES Go to step 8.
NO Replace the ignition fuse.
$
If a fuse is blown, find the cause of the problem and
correct it before replacing the fuse.
Step 8
1) Turn the ignition switch to OFF and disconnect the ABS con-
trol unit coupler. (!Page 26)
2) Turn the ignition switch to ON with the ABS control unit cou-
pler disconnected, measure the voltage between F (O/Y)
and N (B/W) at the coupler.
% Normal value: Battery voltage (12.0 V and more)
" 09900-25008: Multi-circuit tester set
& Tester knob indication: Voltage (')
Is the voltage between F and N normal?
YES Go to step 9.
Inspect the wire harness. (Faulty ignition or
NO
ground wire)
Step 9
1) Turn the ignition switch to ON with the ABS control unit cou-
pler disconnected, measure the voltage between A (Brown)
and N (B/W) at the coupler.
% Normal value: Battery voltage (12.0 V and more)
& Tester knob indication: Voltage (')
Is the voltage between A and N normal?
YES Go to step 10.
Inspect the wire harness. (Faulty indicator light
NO
wire)
ABS control unit coupler (Harness end)
ABS control unit coupler (Harness end)