DTC indication
ABS indicator
light
Mode select switch
ABS OPERATION CHECK
After deleting the DTCs, repeat the code output procedure and
make sure that no DTCs remain (the ABS indicator light no
longer flashes). If any DTCs remain, perform the appropriate
procedures, then delete the codes. If DTCs are left stored, con-
fusion may occur and unnecessary repairs may be made.
Afterwards, ride the motorcycle at more than 30 km/h (18.6 mile/
h) and quickly apply the brakes to check that the ABS activates
correctly.
Permitted range of
erasing DTC
ON
OFF
OFF
ON
1 sec.
1 sec.
1 sec.
GSF1200AK6/SAK6 ('06-MODEL)
Cleaning complete
1 sec.
0.4 sec.
0.4 sec. each
0.4 sec. each
Cleaning
start
Indicate signal
"Cleaning complete"
1 sec.
1 sec.
1 sec.
1 sec.
1 sec.
1 sec.
1 sec.
1 sec.
1 sec.
35
each